Band Saw Blades
Band Saw Blades
 |
 JET 10 AUTOMATIC BAND SAW AB 1012W SHOW DEMO WITH 2 NEW BLADES  US $22,895.00
|
 20 W 15 H Marvel 15A6 HORIZONTAL BAND SAW Auto Feed 5 HP Blade Drive 1 1 4 US $12,500.00
|
 60 Thrt 24 H DoAll 6024 3 VERTICAL BAND SAW Hyd Tbl FeedBlade WelderT Slott US $12,500.00
|
 2008 DoAll 3613 0 VERTICAL BAND SAW 36 Thrt 13 H Vari SpeedBlade Welder US $6,950.00
|
 36 Thrt 12 H Kalamazoo VS 36 VERTICAL BAND SAW Vari SpeedTbl FeedBlade Weld US $5,950.00
|
 DOALL 36 FRICTION TYPE VERTICAL BANDSAW W BLADE WELDER US $5,500.00
|
 36 Thrt 13 H DoAll 3613 1 VERTICAL BAND SAW Vari SpeedTilt TblBlade Welder US $5,500.00
|
 DOALL HORIZONTAL BAND SAW MODEL 10A 1 1 4 X 147 BLADE US $5,000.00
|
 20 MP 20 Do All VERT BANDSAW HYDRAULIC TABLE FEED TABLE TILT 1 BLADE 5 HP US $4,950.00
|
 Grob 4V 18 Vertical Bandsaw w Blade welder 18 Throat US $4,950.00
|
 36 Thrt 13 H DoAll 3613 0 VERTICAL BAND SAW Vari Speed Blade Welder Grinder US $4,950.00
|
 DOALL HORIZONTAL BAND SAW MODEL C7 W 1X253 BLADE12D US $4,500.00
|
 DOALL VERTICAL BAND SAW MODEL 36 2 3 4 BLADE 36 THROAT US $4,500.00
|
 20 DoAll Vertical Band Saw 2012 2A with Blade Welder US $4,500.00
|
 23 Thrt 13 H Dake Johnson V 24 VERTICAL BAND SAW Vari Speed 2HP Blade Welde US $4,500.00
|
 DoAll Vertical Band Saw w blade welder3 4 x 174 blade US $4,000.00
|
 Duall 30 Band Saw36 Throat with blade welder US $3,995.00 |
 BRAND NEW KNUTH VERTICAL BAND SAW WITH BLADE WELDER US $3,450.00
|
 DoALL C 12 HORIZONTAL BAND SAW 12X12 MAX HYDRAULIC HEAD UP DOWN 1BLADE US $3,420.00
|
 Grob Vertical Band Saw w blade welder 1 4x172 blade US $3,250.00
|
 KALAMAZOO STARTRITE VERTICAL BANDSAW w BLADE WELDER US $3,200.00
|
 DoAll 16 Vertical Band Saw 1 1 2 HP 3Ph Blade Welder US $3,000.00
|
 Wood metal hack Band saw blade sharp grinding machine US $2,475.00
|
 16 Thrt 12 H DoAll 1612 0 VERTICAL BAND SAW Vari Speed 1 2 Blade 15 HP US $2,250.00
|
 VEGA 400 METAL BAND SAW 1 PHASE EXTRA BLADES US $1,800.00
|
 18IN WOOD UPRIGHT DAYTON BANDSAW W CART EXTRA BLADES US $1,800.00
|
P.Y.H. Cutting band saw alignment?
I received an answer to my original question that tells me I need to add details. Icannot find an adjusting screw that loosens the rear guide bearing. There is an allen screw that when loosened does nothing to allow adjustment. It is the lower blade guide that is giving me the headache. I have searched the internet for the manufacturer with no luck.
usually allen-head screws are used to keep something in position. Loosening that screw, should allow you to turn an adjusting knob etc. Normally a band saw has two adjustments. The points keep the blade from wobbling to and fro. They have set screws that when loosed, allow one to push the square point further against the blade, or loosen it a bit to allow the blade to move a bit more freely. These points are both above the table and below the table. The other adjustment is the bearing that's located behind the saw-blade. One above and below the table. The are usually controlled by a know that will move the bearing closer to the back of the blade, or move away from the back of the blade to keep the blade from bowing back and forth. These bearings too are usually knob-adjusted, and then a set screw is tightened to keep them in place. Also, there are many web sites that can give you leads and clues as to what is wrong with your particular model and how to fix it.
Coiling a Band Saw Blade